Required Equipment
TC-110, TC-135, TC-125, TC-150, DSC-425, or DSP Controls
Required Electrical Service
Dedicated circuit required: See Specification Chart for proper electrical requirement
Product Information
- Water Supply - ⅜" Compression Fitting
- Steam Line - ¾" Brass BPT male thread
- Pressure Relief Valve - ¾" NPT female thread
- Drain Line - None required
- Auto Drain - Factory installed option
(Not available on InstaMist models
Generator
Installation Notes
Steam Generators can be typically mounted within 25 ft. of the bathing area.
Steam Generators should be accessible for service.
Do not install generators outside, in moist, humid area or in an area where parts may freeze or corrode.
Steamhead to be mounted 18" above floor or 6" above rim of tub and as far from the seating area as possible.
Rough-in Notes
- Access: 21" W x 18" D x 22
- SM-7-IM
Manual - - Model SM-7 / SM-7-IM (Pub. 138-B)